In the renovation of the decoration company, one of the budgets is the
installation of hardware, and the installation of the towel rail bar is
included. Here's Bathroom Towel Rail Bar Manufacturer talking about how to
install the towel bar and the precautions for the towel bar installation.
Bathroom Towel Rail Bar Manufacturer
1. Before installing the towel bar, you must first select the location to be installed. When installing the towel bar, be careful not to have other close-range items around, or you can not hang the towel after installation. The height of the towel bar installation is generally between 1.1 and 1.2 meters from the ground. If the towel rack is installed, it is generally 1.5 meters from the ground.
2. There are several different types of towel bar installation, pay attention when choosing a towel bar. There are two types of punch-free types, one is to use a glass glue or other adhesive to be attached by means of sticking, and the other is to have a suction cup on the towel bar.
3. The towel bar installation that is needed to punch is more complicated than the other two, but the effect is more firm after installation. When installing such a towel bar, first place the towel bar on the wall, use a pencil to draw the line where it needs to be punched, pay attention to the level of the two holes, and then use the electric drill to punch the hole in the place where the line is drawn.
4. Next, place the base of the pendant on the wall. Align the hole on the base with the hole on the wall, and then screw the screw in with a screwdriver.
We are a factory who sells good Chrome Towel Rail Bar. Of course, we also have many other kinds of products. If you need any information, you can contact us.